GAMDIAS AEOLUS P2-1203 WH، عبوة من 3 مراوح هيكل 120 مم ARGB PWM، إطارات سميكة 30 مم، 1000-2400 دورة في الدقيقة، تدفق هواء 75 CFM، مرآة مزدوجة لا نهائية ARGB، سلسلة ديزي بدون كابل، تحكم PWM، لون أبيض

The GAMDIAS AEOLUS P2-1203 WH fan pack is a premium cooling solution engineered for gamers, creators, and system builders who demand both high airflow performance and striking visual aesthetics. This 3-pack delivers a carefully balanced combination of raw cooling capability, modular installation convenience, and advanced addressable RGB lighting — all wrapped in a white aesthetic that complements modern white or light-theme builds.

At the core of the AEOLUS P2 design is a deliberate move beyond typical 25mm fan frames. Each fan uses a 30mm thick frame, which increases the effective air tunnel and gives the blade more room to accelerate air. That increased blade-to-frame engagement translates into higher static pressure and airflow without a proportional rise in noise. Practically, this allows the AEOLUS P2 set to move more air across dense radiators and restrictive front panels — a distinct advantage for liquid-cooling radiators and dust-filtered cases.

Performance-wise, the AEOLUS P2 fans operate in a wide, usable band: the units spin from around 1,000 RPM up to 2,400 RPM (manufacturer-stated range, ±10%), letting you tune them for quiet daily work or aggressive thermal loads during rendering or gaming. At peak speeds, the fans deliver airflow figures near 75 CFM and a static pressure of about 3.1 mmH₂O. What this means in practice is that the AEOLUS P2s are strong choices for both case airflow and radiator push/pull configurations: they can move a lot of air and sustain pressure across obstructions (filters, dense fins), while still supporting PWM speed control to keep acoustics reasonable when full power isn’t needed.

Lighting is a central design point. AEOLUS P2 fans feature dual infinity-mirror ARGB rings (addressable RGB) around the blade area and frame, producing depth and striking mirror-style lighting effects. Each fan is fitted with multiple individually-addressable LEDs (reported counts show around 32 LEDs per fan) to produce complex effects and smooth gradients. For builders who want system-wide synchronization, the kit supports standard 5V addressable RGB headers on modern motherboards (V-D-+-G pinouts) as well as operation through GAMDIAS’ AEOLUS control box (supplied in controller bundles), offering both automatic and manual control of lighting and speed. The dual mirror layout lets you achieve vivid, three-dimensional lighting across multiple fans with minimal signal degradation.

Cable management and tidy builds are a major practical advantage here. GAMDIAS implemented a cable-less daisy-chain mechanism so fans link end-to-end and connect to the controller with a single cable. This drastically reduces spaghetti cabling in modern builds and makes multi-fan installations far cleaner. For those who prefer motherboard sync and want fewer external adapters, the daisy-chain wiring still allows the whole set to be connected to a single addressable RGB header and a single PWM input (or the supplied controller). That design reduces the number of connectors routed to the motherboard and simplifies troubleshooting.

Another smart detail: AEOLUS P2 fans include swappable inner fan blades (standard and reverse orientation). This is a small but impactful feature: you can swap blade orientations to reverse airflow direction without changing the fan’s physical mounting. For custom builds or setups where intake/exhaust balance matters, this gives an immediate, tool-free way to change airflow direction while keeping the fan’s orientation consistent with your aesthetic.

Durability is engineered into both mechanics and electrics. The fans use hydraulic bearings for a long lifetime and low operational noise, and internal wiring is shielded to preserve signal integrity for ARGB and power. GAMDIAS rates these fans for typical long-term operation and pairs them with a compact controller unit (AEOLUS Box II in controller bundles) that offers SATA-powered stability and the ability to manage multiple fans and LED strips.

Practical installation notes: the AEOLUS P2 set ships with mounting screws and, for controller bundles, a small AEOLUS controller box with SATA power and multiple fan / LED inputs. The fans are a 120×120×30 mm form factor, so confirm clearance if your case has shallow front/rear mounting points (the 30mm thickness is greater than standard 25mm fans). On radiators, the increased thickness can be a net benefit due to improved static pressure, but double-check clearance to front panels or drive cages.

Who is this pack for? The AEOLUS P2-1203 is ideal for performance-minded builders who want a single kit that: (a) improves airflow or radiator cooling, (b) cleans up cabling with a daisy chain system, and (c) produces standout ARGB visuals. If you run multi-fan radiators (240–360mm), or if you want a bold white build with vivid ARGB accents, this pack covers both functional cooling and show-quality lighting.

Maintenance and care are straightforward: the swappable blades simplify deep cleaning — pop the inner blade set and wipe dust from the frame and hub. The hydraulic bearings don’t require lubrication for typical lifetimes, but routine dusting will preserve peak performance. For those controlling lighting via motherboard headers, keep a firmware/update check on your motherboard RGB software to avoid occasional incompatibilities caused by vendor software versions.

In short, the AEOLUS P2-1203 WH 3-pack is a thoughtfully engineered, high-performance ARGB fan set tailored for builders who value both thermal performance and premium lighting. Its thicker frames, cable-less daisy-chain convenience, swappable blade orientation, and dual infinity mirror ARGB all combine to make it a competitive choice in the premium case fan segment.