D-Link DES-F1016P-E 16-Port 10/100 Mbps Long-Range PoE+ Surveillance Switch 16 PoE Ports with 2 Gigabit Uplinks (RJ45/SFP), 250 m Reach
-
16 ports of 10/100 Mbps PoE RJ-45 plus 2 Gigabit uplink ports (including RJ-45/SFP combo)
-
Supports standard IEEE 802.3af/at PoE protocols for powering devices like IP cameras and access points
-
Up to 150 W total PoE power budget to support multiple PoE devices
-
Enables extended cable reach up to 250 m for PoE devices in remote locations
-
Switching capacity of 7.2 Gbps and packet forwarding rate of 3.868 Mpps
-
Fanless, metal-chassis, plug-and-play design for quiet, reliable deployment
-
Built-in surge/lightning protection (6 kV) and flow control features for better network robustness
Ports & Connectivity
-
16 × 10/100 Mbps Fast Ethernet PoE RJ-45 ports (ports 1–16)
-
2 × Gigabit uplink ports, including 1 combo RJ-45/SFP uplink port (port 17)
-
Auto MDI/MDIX supported on all ports
-
Plug-and-play, unmanaged switch
Power over Ethernet (PoE)
-
Supports IEEE 802.3af and IEEE 802.3at PoE standards
-
Total PoE budget: 150 W
-
Long-reach support: PoE/data transmission up to 250 metres in “Extend” mode
Switching/Performance
-
Switching capacity: 7.2 Gbps
-
Maximum packet forwarding rate: 3.868 Mpps
-
Flow control: IEEE 802.3x supported
-
Jumbo-frame / MAC address table details not specified in the main sheet
Standards
-
Ethernet: IEEE 802.3 (10BASE-T)
-
Fast Ethernet: IEEE 802.3u (100BASE-TX)
-
Gigabit Ethernet: IEEE 802.3ab (1000BASE-T)
-
Gigabit fiber: IEEE 802.3z (1000BASE-X)
-
PoE: IEEE 802.3af / IEEE 802.3at
Physical & Environmental
-
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
-
Operating humidity: 10 % to 90 % non-condensing
-
Power input: 100-240 VAC, 50/60 Hz
-
Fanless design (quiet operation)
Features & Modes
-
Long-range mode (“Extend Mode”) for ports 1–8 supporting up to 250 m cable runs (with appropriate cabling)
-
VLAN Mode: isolating ports to prevent network storms and enhance performance
-
QoS Mode: prioritises video/monitoring traffic for smoother surveillance system operation
-
Power Mode: auto-detects non-active devices on PoE ports and resets them
