Ubiquiti UniFi Switch Flex 5‑Port Gigabit Layer 2 Managed PoE Switch with Up to 46W PoE Output and Weather‑Resistant Design - USW-Flex
Estimated delivery within UAE 1-2 working days
Delivery to other countries 3-5 working days
Special Offers
Epson EcoTank L8100 3-in-1 A4 Photo Printer, 22 pages/min Monochrome, Ink Tank System, 1200 x 4800 DPI, Epson Smart Panel App, C11CK94402
Epson EcoTank L3250 Printer All-in-One Ink Tank Printer , Print, copy, scan Wi-Fi
-
5‑port Gigabit managed switch (USW‑Flex) designed for modern PoE device deployment.
-
Offers 1 PoE input port and 4 PoE output ports with a PoE budget up to ~46 W.
-
Switching fabric supports 10 Gbps and non‑blocking throughput of 5 Gbps for reliable traffic.
-
Fully supports 802.3af/at/802.3bt (PoE/PoE++), enabling flexible power options to downstream devices.
-
Extremely low idle power (~5 W) and compact form‑factor (122.5×107.1×28 mm) for efficient installation.
-
Weather‑resistant chassis with pole/wall‑mount options — suitable for indoor or outdoor use.
-
Wide ambient operation range (down to ‑40 °C) ensures suitability for a variety of environments.
-
Managed via the UniFi Network controller — full Layer 2 features, VLANs, port controls out of the box.
-
Model: USW‑Flex
-
Ports: 5 × Gigabit RJ‑45 Ethernet ports (1 PoE input, 4 PoE output)
-
Switching capacity: 10 Gbps total
-
Non‑blocking throughput: 5 Gbps
-
PoE Input Port (Port 1): Supports 802.3af/at/802.3bt or PoE++
-
PoE Output Ports (Ports 2‑5): Auto‑sensing 802.3af/at; maximum ~25 W per port when fully powered
-
Total PoE Budget: Up to ~46 W when powered via PoE++ or 60 W adapter
-
Max Power Consumption (device only, excluding PoE output): ~5 W
-
Supported Input Voltage Range (PoE Input): 44‑57 V DC (PoE); 50‑57 V DC (PoE+/PoE++)
-
Enclosure: Weather‑resistant housing; indoor/outdoor deployment, wall, pole or desktop mountable
-
Ambient Operating Temperature: −40 °C to +55 °C (when full PoE output); up to +65 °C under reduced load
-
ESD/EMP Protection: ±16 kV air, ±16 kV contact
-
Management: Managed via UniFi Network Controller (Layer 2 switch)