شريط إضاءة خلفية LED للتلفزيون Govee H61790A1 RGB بتقنية البلوتوث بطول 10 أقدام لأجهزة التلفزيون مقاس 46-60 بوصة - مزامنة الموسيقى • تطبيق وجهاز تحكم عن بُعد • مصابيح LED متعددة الألوان

-
حجم/طول مناسب للتلفزيون: شريط بطول 3 أمتار تقريبًا، مصمم لتغطية جميع جوانب أجهزة التلفزيون مقاس 46-60 بوصة.
-
وضع الإضاءة: شريط LED متعدد الألوان RGB مع مزامنة الموسيقى وأوضاع متعددة للمشاهد/الديناميكية.
-
آليات التحكم: تطبيق (Govee Home)، بلوتوث وجهاز تحكم عن بُعد متضمن.
-
الطاقة/الواط: حوالي 10 واط، تعمل عبر محول أو منفذ USB حسب الإصدار.
The Govee H61790A1 TV LED Backlight (also known in listings as the Govee H6179 model) is a flexible smart ambient lighting strip designed to enhance your television or monitor viewing experience. Perfectly sized for 46-60″ screens, the strip comprises roughly 3 meters (~10 ft) of LED lighting that wraps around all four sides of your display to produce immersive, edge-lighting effects. This entry details the features, performance, installation considerations, and everyday use cases for this model.
Lighting Quality, Modes & Atmosphere
At its core, the H61790A1 strip offers multicolor RGB lighting—you can set static color tones, transitions, color flow, or vibrant dynamic effects. One of its hallmark features is music sync: the strip includes either a built-in mic or relies on app/phone audio detection to make lights react in real time to music or sound from your room. This effect enhances gaming, watching films, or hosting gatherings by synchronizing lighting with beats, dialogue, or ambient sound.
Scene modes are included—preset lighting themes (e.g., “Sunset”, “Party”, “Warm Glow”, “Color Flow”) that allow quick setup without manual configuration. The Govee Home app gives you control over brightness, color selection, dynamic mode speed, and scheduling/dimming. For static tasks or general television watching, you can use neutral or warm static colors to reduce contrast between screen brightness and room darkness, which helps reduce eye strain. For movies, gaming, or music, the dynamic modes add visual flair and immersive feedback.
Compatible Screen Sizes & Physical Layout
Because the strip is long enough (~3 m) and comes in segments, it is configured to cover all four sides of TVs between 46-60 inches. The kit comes with 4 pieces: typically two longer segments (each ~3.28 ft, or ~1 m) and two shorter (about ~1.64 ft each), joined via flexible connectors so they wrap neatly around corners. Adhesive backing plus included clips help secure the strip to the rear edges of a TV. Using correct cable routing behind the TV ensures minimal visible wires. The length sizing is ideal: smaller screens may have excess strip which can be trimmed (often the adhesive supports this) or tucked away; larger screens may need extension or a larger strip model.
Control & Connectivity
The H61790A1 uses Bluetooth for local control (remote included) and supports app control via Govee Home. Some versions may include remote or control box. You can use your phone/tablet or remote to turn the strip on/off, adjust brightness, change color or dynamic mode, and when connected to app, access more settings: timers, schedules, scene editing, etc. Voice assistant control support may vary by region or firmware; many listings mention “voice control” but might rely on remote or app rather than direct integration. Always check local version for Alexa/Google support.
Power, Efficiency & Electrical Details
The backlight strip draws around 10 W under typical operation, depending on brightness and dynamic modes. Power can be supplied via included adapter or USB depending on your version/country. Voltage is low DC for safety, but the adapter must match local mains voltage input. Lower brightness or static color modes will draw less power; bright dynamic or full RGB modes increase power usage. This makes the H61790A1 power-efficient enough for evening or ambient use without running up electricity costs dramatically.
Installation & Practical Use
Installing the strip behind a TV is straightforward: clean the rear surface, use the adhesive strip, secure with clips especially at corners, attach power supply and remote or app controller. Be mindful that bend radius at corners should be gentle to prevent LED damage or connection issues. Cable visibility should be hidden — use existing outlets or TV cable channels to route the wire neatly.
For best results, position the strip so that light reflects off the wall behind the TV, which enhances the perceived contrast and reduces eye fatigue in dark rooms. Adjust brightness so it’s visible but not overpowering — dynamic modes can be bright and may distract if lighting harshly reflects on the screen. Many users use the strip in lower brightness for general viewing, then increase brightness or enable dynamic modes for gaming or entertainment.
Everyday Use Cases & Benefits
-
TV Watching / Movies: Reduces eye strain by adding backlight behind the TV, which balances brightness contrast between screen and dark room.
-
Gaming: Dynamic lighting and music sync add immersion; scene modes with rapid transitions help response during fast-action games.
-
Ambient / Mood Lighting: Use color themes for relaxation, parties, or decorations; outside of TV media when not in use, static or color organic scenes enhance atmosphere.
-
Streaming / Content Creation: Backlighting improves background visuals for camera capture; consistent lighting helps with auto exposure on webcams.
Limitations & What to Know
-
Bluetooth control has range limits; app control requires device to be connected.
-
Some features depend on app version, firmware, or local regulations. Voice control support may depend on region and may require bridge or hub.
-
The strip is not waterproof, and adhesive durability depends on surface cleanliness and temperature/humidity; high heat behind TVs may affect adhesive.
-
Physical trimming of strip is possible in some versions but doing so may divide segments or require connectors. Corners need careful mounting.
-
Brightness in dynamic RGB modes is lower per LED vs dedicated backlight panels; heavy reliance on dynamic modes means more power draw.
Summary
The Govee H61790A1 (H6179) TV LED Backlight is a versatile, mid-range ambient lighting strip suited for 46-60″ TVs. It delivers vivid multicolor, music sync, scene-modes, app and remote control, reasonable power draw, and neat hardware. It’s not built for outdoor use or rugged conditions, but for indoor entertainment living rooms, gaming setups, or ambient décor it offers excellent value. If you want to upgrade your room’s mood, reduce eye strain, or get immersive lighting without breaking budget, this model covers most use cases.