Grandstream GWN7806P 48‑Port Gigabit Layer 2+ Managed PoE/PoE+ Switch 400W PoE Budget, 6 SFP+

General / Device Type

• Layer 2+ managed switch with support for PoE/PoE+

• 48 × Gigabit Ethernet RJ‑45 ports (all support PoE/PoE+)

• 6 × 10 Gbps SFP+ uplink ports

• Embedded controller for GWN devices, integrates with cloud and local management platforms

PoE / Power

• Supports IEEE 802.3af and IEEE 802.3at (PoE+) on all RJ‑45 ports

• Up to 30 W per port

• Total PoE power budget: 400 W

• Smart per‑port dynamic power allocation

• Internal power supply sized to support full PoE budget

Switching / Performance

• Switching capacity: 216 Gbps

• Non‑blocking throughput: 108 Gbps

• Forwarding rate: ~160.704 million packets per second (Mpps)

• MAC address table capacity: 32,000 entries

• Packet buffer memory: 16 MB

• Jumbo frame support (extended MTU)

VLAN / Networking & Protocols

• Supports up to 4,000 VLANs (port‑based, 802.1Q, voice VLAN, QinQ)

• Link aggregation (LACP) with multiple groups

• Spanning Tree protocols: STP, RSTP, MSTP

• Static routing capabilities (inter-VLAN routing)

• IGMP / MLD snooping for multicast optimization

Security & Control

• ACLs for Ethernet / IPv4 / IPv6 filtering

• 802.1X authentication, MAC authentication, AAA (RADIUS / TACACS+)

• DHCP snooping, ARP inspection, IP source guard

• Storm control (broadcast / multicast / unicast)

• Port security, port isolation, loop protection, BPDU / root guard

Quality of Service (QoS)

• 8 priority queues

• DSCP and 802.1p priority mapping

• Traffic shaping / rate limiting

• Queue scheduling (WRR, strict priority, hybrid)

• Voice / real-time traffic prioritization

Management & Features

• Web GUI, command-line interface (SSH, Telnet, console)

• SNMP v1 / v2c / v3, RMON support, syslog, diagnostic tools

• Stacking support (up to 16 units)

• Integration with cloud (GNW.Cloud) and on‑premise controller (GWN Manager)

• Dual firmware / redundancy, fault detection, link failover

Physical & Environmental

• Mounting: Rack (1U), desktop or wall (mounting kits included)

• Operating temperature: 0 °C to 45 °C

• Storage temperature: –10 °C to 60 °C

• Humidity: 10% to 90% RH, non-condensing

• Active cooling (internal fans)