MikroTik RB1100AHx4 Dude Edition 13×Gigabit LAN (60 GB M.2 SSD) Dual Redundant PSU IPsec hardware acceleration
Estimated delivery within UAE 1–2 working days
Delivery to other countries 3–5 working days
-
Powerful quad-core 1.4 GHz AL21400 CPU delivering up to ~7.5 Gbps throughput.
-
Built-in IPsec hardware acceleration reaching ~2.2 Gbps (AES128).
-
13 Gigabit Ethernet ports plus RS-232 console in a 1U rack-mount chassis.
-
Pre-installed 60 GB M.2 SSD for SNMP/monitoring database plus 2× SATA3 & 2× M.2 storage slots.
-
Dual redundant power inputs: 100-240 V AC, DC terminal (-48 V telecom), and 802.3af/at PoE-in.
-
Low power consumption (~25 W typical), wide operating temperature range (-40 °C to +70 °C).
-
Comprehensive monitoring: voltage, current, PCB temperature, with beeper and fail-safe PSU redundancy.
-
Runs RouterOS Level 6, ideal for enterprise network routing, monitoring and high-capacity deployments.
-
RAM:
-
Size: 1 GB DDR3
-
-
Storage:
-
NAND: 128 MB
-
Extended Storage:
-
Pre-installed 60 GB M.2 SSD
-
2× SATA3 ports
-
2× M.2 slots (2242/2260/2280)
-
-
-
Ethernet Ports:
-
13 × 10/100/1000 Mbps Gigabit Ethernet (Auto-MDI/X)
-
RS232 console port
-
-
USB Ports:
-
1 × USB Type-A
-
Supported Storage: microSD card (1 slot)
-
-
Powering:
-
AC Inputs: 2 × IEC C14 (100–240 V)
-
DC Inputs: 2-pin terminal block (‑48 V telecom power supported; range 20–57 V)
-
PoE Input: 802.3af/at (20–57 V)
-
Max Power Consumption:
-
Without attachments: ~25 W
-
Under full load: ~33 W
-
-
-
Operating System:
-
RouterOS License Level: 6
-
Architecture: ARM 32-bit
-
-
Performance:
-
Maximum Throughput: Up to ~7.5 Gbps
-
IPsec Hardware Acceleration: Up to ~2.2 Gbps (AES128)
-
-
Environmental:
-
Operating Temperature: Tested from ‑40°C to +70°C
-
MTBF (Mean Time Between Failures): Approximately 200,000 hours at 25°C
-