Ubiquiti UniFi UAP-AC-IW Dual‑Band In‑Wall WiFi Access Point (802.11ac) with 3× Gigabit Ethernet Ports & PoE Pass‑Through
Estimated delivery within UAE 1–2 working days
Delivery to other countries 3–5 working days
-
In‑wall dual‑band 802.11ac WiFi access point (2.4/5 GHz) for discreet room‑level deployment.
-
Up to ~300 Mbps on 2.4 GHz and ~867 Mbps on 5 GHz using 2×2 MIMO technology.
-
Includes 3 Gigabit RJ‑45 ports, one of which supports 48 V PoE passthrough for downstream devices.
-
Powered via 802.3at PoE+ (44‑57 VDC) for clean installation without extra power outlet.
-
Very low power consumption (~7 W) when not passing through PoE, rising to ~19 W when passthrough is active.
-
Compact design: 139.7 × 86.7 × 25.75 mm, ~200 g weight — fits standard 1‑gang electrical wall box.
-
Supports large number of concurrent clients (250+), ideal for hotels, apartments or offices.
-
Managed via the UniFi controller ecosystem; integrates seamlessly in UniFi networks.
-
Model: UAP‑AC‑IW
-
Mounting: In‑wall, fits 1‑gang electrical wall box
-
Wireless Standard: IEEE 802.11a/b/g/n/ac (dual‑band)
-
Frequency Bands: 2.4 GHz and 5 GHz
-
Max Data Rate: 2.4 GHz up to ~300 Mbps ; 5 GHz up to ~867 Mbps
-
MIMO: 2×2 in both bands
-
Ethernet Ports: 3 × Gigabit RJ‑45 (10/100/1000)
-
PoE Input: 802.3at PoE+ (44‑57 VDC)
-
PoE Pass‑through: one port supports 48 V pass‑through for powering downstream device
-
Power Consumption: ~7 W (without passthrough) ; up to ~19 W (with passthrough)
-
Transmit Power: 20 dBm on 2.4 GHz & 20 dBm on 5 GHz
-
Antenna Gain: ~1 dBi on 2.4 GHz ; ~2 dBi on 5 GHz
-
Operating Temperature: ‑10 °C to 50 °C
-
Operating Humidity: 5% to 95% non‑condensing
-
Supported Clients: 250+ concurrent devices
